Anypreta — Embedded Systems Engineering, Production Optimization & R&D Consulting

The Hidden Cost of "Good Enough"

Problems You Didn't Know You Had

Most companies don't call us because something is broken. They call us after we show them what's been quietly costing them money, time, and market share for years.

Overpaying for Components

Your BOM was designed once and never revisited. We routinely find 15–30% cost savings by identifying overspecified parts, pin-compatible alternatives, and smarter sourcing strategies.

Slow Time-to-Market

Firmware rewrites, late-stage PCB respins, failed compliance tests — these delays compound. We've seen products ship 6 months late because nobody caught a thermal issue in Rev A.

Process Blind Spots

Your engineering team is talented, but without structured reviews, gated milestones, and cross-functional checks, good engineers produce inconsistent results.

EMC & Compliance Failures

Failing radiated emissions at the test lab is expensive. We design for compliance from day one — not as an afterthought before the deadline.

Wrong Platform Choice

Choosing the wrong MCU, SoC, or RTOS early in a project haunts you for its entire lifecycle. We audit architectures before they become technical debt.

Scaling Without Structure

Growing from 5 to 50 engineers without proper processes, documentation standards, and review frameworks creates chaos. We help you build the scaffolding.

What We Deliver

Engineering Services

From silicon to certification stamp — and from short-term expertise to embedded team augmentation. We cover the full embedded product lifecycle and provide senior engineers directly into customer projects when extra hands and deep experience are needed.

Embedded Hardware Design

Full-cycle PCB design from schematic capture through layout, prototyping, and production hand-off. Multi-layer, high-speed, mixed-signal — we've done it hundreds of times.

Schematic & PCB layout (Altium, KiCad, OrCAD)
Signal integrity & thermal analysis
DFM, DFT, and design reviews
BOM optimization & component engineering
Prototype bring-up & validation

Embedded Software

Bare-metal firmware, RTOS applications, and embedded Linux/QNX systems. We write code that ships — deterministic, testable, and maintainable.

RTOS (FreeRTOS, Zephyr, ThreadX) development
Bare-metal & HAL driver development
Embedded Linux BSP & QNX integration
Bootloader, OTA & secure boot
MISRA-C, static analysis & unit testing

Compliance & Certification

CE, FCC, UL, RED, automotive, medical — we know the standards and we design to pass them. No surprises at the test lab.

EMC pre-compliance testing & mitigation
CE / FCC / IC / RED certification support
Functional safety (IEC 61508, ISO 26262)
Medical device standards (IEC 62304, IEC 60601)
Technical documentation & test lab liaison

Senior Embedded Engineers for Customer Projects

Key Service

Senior Engineers for Your Project

Need proven embedded engineers inside your team? We provide senior specialists as project workforce — quickly, pragmatically, and with minimal ramp-up. Whether you need one expert or a small focused team, we integrate with your organization and start delivering fast.

Senior embedded hardware, RF, power, and firmware engineers
Short-term support or long-term team augmentation
Fast onboarding into existing customer teams and workflows
Technical leadership, reviews, and hands-on execution
Ideal for critical milestones, recovery projects, and scaling phases

Process & Management Consulting

Engineering excellence doesn't come from talent alone — it comes from systems. We audit your workflows and build processes that scale.

R&D workflow audit & optimization
Design review frameworks & gated milestones
Team structure & management assessment
Documentation standards & version control
Vendor & supply chain management

RF & Wireless Design

From antenna matching networks to full RF front-end design. We work across ISM bands, cellular, GNSS, BLE, Wi-Fi, LoRa, and custom protocols.

RF circuit design & impedance matching
Antenna selection, placement & custom design
RF layout best practices & shielding
Pre-compliance & radiated emissions testing
Wireless protocol stack integration

Our Approach

How We Work

No bloated proposals, no filler teams. We deploy senior engineers who understand your problem from day one — whether as consultants, technical leads, or embedded workforce integrated directly into your project team.

01

Discovery & Audit

We start by understanding your product, your constraints, and your goals. We audit your existing designs, firmware, BOM, and processes to identify what's costing you.

02

Strategy & Plan

We present clear findings with actionable recommendations, timelines, and cost projections. You decide what to tackle first — we prioritize by impact.

03

Execution

Our engineers integrate with your team or work independently. We design, build, test, and iterate — with transparent milestones and regular check-ins.

04

Handoff & Support

Full documentation, knowledge transfer, and production-ready deliverables. We stay available for support, scaling, and future iterations.

Where We Operate

Industries We Serve

Our engineers have shipped products across dozens of verticals. Embedded challenges may differ by domain — the engineering rigor doesn't.

Automotive

Medical Devices

Industrial & IoT

Robotics

Consumer Electronics

Logistics & Fleet

The Anypreta Difference

Why Companies Choose Us

We Find Problems You Can't See

Our engineers have worked on hundreds of embedded products. We recognize patterns of waste, risk, and inefficiency that internal teams often overlook — not because they're not good, but because they're too close.

Senior Engineers Only

No junior bench-warmers. Every person we put on your project has 10+ years of hands-on embedded engineering experience. Small team, massive impact.

Full Stack, One Team

Hardware, firmware, RF, power, compliance, process — all under one roof. No finger-pointing between vendors. One team owns the outcome.

We Transfer Knowledge

We're not here to create dependency. We document everything, train your team, and leave you stronger than we found you.

Proven Impact

Results That Speak

We measure our success in your savings, your speed, and your shipped products.

-28%

BOM Cost Reduction

Industrial IoT gateway manufacturer. We audited their 340-line BOM and identified overspecified components, redundant protection circuits, and cheaper pin-compatible alternatives.

Saved €4.20 per unit across 50,000 units/year

3 Months

Faster to Market

Medical wearable startup. We took over a stalled firmware project, restructured the RTOS architecture, and brought it through IEC 62304 compliance in one pass.

Product launched ahead of revised schedule

First Pass

CE/FCC Certification

Consumer electronics company had failed EMC testing twice. We redesigned the power supply filtering and RF shielding, then guided them through the entire re-test process.

Certified on the next attempt, zero retests

Who We Are

Small Team.
Deep Expertise.

Anypreta was founded by engineers who spent years inside large organizations watching talented teams struggle with avoidable problems — wrong component choices, absent processes, compliance surprises, and management structures that don't scale.

We built Anypreta to be the team we wished we could call. A small group of senior specialists who understand the entire embedded product lifecycle — from first schematic to final certification stamp — and who can parachute in to fix what's broken or build what's missing.

We don't sell hours. We sell outcomes. Every engagement starts with understanding your real problem, not the symptoms you came to us with.

20+

Embedded projects across hardware, firmware, and RF

8+ Years

Average engineer experience on the team

Common Questions

Frequently Asked Questions

That's exactly who we work best with. Your team knows your product — we bring an outside perspective with cross-industry experience. We've seen the same mistakes across hundreds of projects and can quickly spot issues your team is too close to notice. Think of us as a force multiplier, not a replacement.

It depends on the engagement. Audits and assessments are typically fixed-price. Longer engineering projects can be milestone-based or time-and-materials with a cap. We'll propose what makes sense for your situation during our initial conversation — no surprises.

Absolutely — that's actually how most of our engagements start. We begin with a discovery call, then a focused audit of your current product or process. We'll tell you what we find, prioritize by impact, and you decide what to act on. Many clients are surprised by what we uncover.

Both. Most of our design work is done remotely, but we come on-site for audits, bring-ups, lab work, and workshops. We're flexible and will adapt to whatever makes the project successful.

From well-funded startups shipping their first product to established mid-size manufacturers optimizing their 10th generation. If you have a hardware product and a team that cares about doing it right, we're a good fit.

Yes. We can design for compliance from the start, fix products that have already failed testing, and manage the entire test lab process. Our track record is 100% certification success for products we've been involved with from the design phase.

We're a small, focused team so availability varies. For most projects, we can kick off within 1–2 weeks. For urgent compliance or production issues, we've mobilized within days. Reach out and we'll give you an honest timeline.

Start the Conversation

Let's Find What's Slowing You Down

Tell us about your product, your challenge, or just a nagging suspicion that things could be better. We'll take it from there.

Name

Company

Email

Phone (optional)

What are you looking for?

Tell us more

We typically respond within one business day.